ADVANCED CCIE RS LAB v2.0
Enterprise Network Design
MPLS Core · Dual DMVPN · MP-BGP · 6PE
Original 20-router topology with MPLS VPN backbone, dual-region DMVPN Phase 3, BGP route reflection, OSPFv3, EIGRP named mode, MPLS-TE, multicast, QoS, and IPv6 6PE. All protocols running simultaneously.
⬡ MPLS CORE — 4 P Routers
⬡ PROVIDER EDGE — 4 PE Routers
⬡ INTERNET BORDER — 2 ASBR
⬡ DMVPN WEST — 5 Routers
⬡ DMVPN EAST — 5 Routers
⬡ CUSTOMER EDGE — 2 CE
Master Topology — Full 20-Router Diagram
⚠ This lab is provided for technical reference and educational purposes only. Ioannis (John) Alexander Konstas assumes no responsibility for use in production environments. All configurations are original designs for GNS3/EVE-NG simulation. No passwords, IP addresses, or topology elements are derived from any third-party source.
Lab Scenarios — 20 Labs
MPLS Core & VPN (Labs 01–05)
LAB 01
MPLS Core LDP Label Distribution
LDP neighbor authentication, custom label range 1000–9999, BFD fast detection, OSPF area 0 backbone with autoconfig.
MPLS
LDP
OSPF Area 0
BFD
LAB 02
MPLS L3VPN — VRF CORP End-to-End
VRF CORP RD 65000:100, PE-CE OSPF redistribution, MP-BGP VPNv4, route-target import/export, CE-to-CE ping verification.
MPLS VPN
VRF
MP-BGP VPNv4
LAB 03
MPLS VPN — PE-CE BGP with AS Override
PE-CE BGP session, AS override to solve same-AS problem, allow-as-in on CE, prefix filtering with maximum-prefix safety.
PE-CE BGP
AS Override
AS 65500
LAB 04
MPLS VPN — VRF Internet Access
Route leaking from global to VRF, NAT for VRF customers, import map with internet RT 65000:9999, static default in VRF.
Route Leaking
NAT
Default Route
LAB 05
MPLS VPN — OSPF Sham-Link
Backdoor link suppression using sham-link, loopback VRF CORP, area sham-link config on ABR, intra-area preference verification.
Sham-Link
OSPF
Backdoor
DMVPN Phase 3 (Labs 06–08)
LAB 06
DMVPN Phase 3 — West Region Dual-Hub
mGRE multipoint tunnel, NHRP Phase 3 shortcut, dual NHS priority/cluster redundancy, spoke-to-spoke shortcut verification.
DMVPN Phase 3
NHRP
mGRE
LAB 07
DMVPN Phase 3 — East Region with QoS
DMVPN East region, EIGRP named mode, bandwidth/delay tuning, DSCP classification, LLQ voice priority on Tunnel0.
DMVPN Phase 3
QoS
DSCP
LAB 08
DMVPN EIGRP — Summarization and Stub
Hub summary injection toward core, spoke stub mode, leak-map for selective prefix advertisement, split-horizon on hub tunnel.
EIGRP
Stub
Leak-Map
BGP Advanced (Labs 09–12)
LAB 09
BGP Route Reflection
CORE-1/2 as co-RRs in cluster 1, client peer-groups, ORIGINATOR_ID and CLUSTER_LIST verification, non-client full mesh.
Route Reflector
MP-BGP
Cluster
LAB 10
BGP Confederation
Sub-AS 65010/65020/65030 structure, confederation identifier 65000, EBGP between sub-ASs, AS-path confederation segment verification.
Confederation
Sub-AS
AS-Path
LAB 11
BGP Communities — Policy Control
Community tagging at BORDER routers, community-list matching at CORE, local-pref policy centralization, send-community configuration.
Communities
Local-Pref
Route Maps
LAB 12
BGP Prefix Filtering — ORF
Prefix-list with ge/le operators, ORF capability negotiation, distribute-list comparison, maximum-prefix safety limits.
Prefix-List
ORF
Security
OSPF, EIGRP & IPv6 (Labs 13–15)
LAB 13
OSPF Multi-Area — Stub, NSSA, Filtering
Totally-stubby areas on CE segments, NSSA for ASBR CE redistribution, Type-3 LSA filtering at ABR, area filter-list.
OSPF
NSSA
LSA Filter
LAB 14
OSPFv3 Dual-Stack IPv6 Backbone
OSPFv3 area 0 on backbone, IPsec AH authentication, dual-stack parallel to OSPFv2, BFD for IPv6 adjacencies, LSA types 8 and 9.
OSPFv3
IPv6
Dual-Stack
LAB 15
EIGRP Named Mode — Wide Metrics
address-family IPv4+IPv6 under named EIGRP, wide 64-bit metrics, af-interface per-AF tuning, stub control per address-family.
EIGRP Named
Wide Metrics
IPv4+IPv6
Traffic Engineering & Advanced (Labs 16–20)
LAB 16
MPLS Traffic Engineering — TE Tunnels
RSVP bandwidth reservation, explicit path CORE-1→CORE-4, auto-bandwidth, OSPF-TE opaque LSAs, CSPF path computation.
MPLS TE
RSVP
Explicit Path
LAB 17
Multicast PIM-SM — Auto-RP and MSDP
RP on CORE-2, Auto-RP and BSR redundancy, shared tree vs SPT switchover, MSDP between BORDER-1 and BORDER-2 for inter-domain multicast.
PIM-SM
Auto-RP
MSDP
LAB 18
QoS on DMVPN — HQoS and Shaping
Hierarchical QoS with parent shaper + child CBWFQ/LLQ, DSCP trust boundary, voice EF strict priority, per-AF bandwidth allocation.
QoS/HQoS
DSCP
LLQ
LAB 19
6PE — IPv6 over MPLS without P IPv6
mpls ipv6 source-interface, iBGP labeled IPv6 unicast, two-label stack (transport + IPv6), CE-to-CE IPv6 reachability via IPv4 MPLS.
6PE
Labeled Unicast
IPv6
LAB 20 — CAPSTONE
Full Integration — All 20 Routers
All protocols running simultaneously: MPLS VPN + DMVPN Phase 3 + MP-BGP + OSPFv3 + EIGRP Named + Multicast + QoS + 6PE. Systematic verification checklist.
MPLS VPN
DMVPN
MP-BGP
Multicast
QoS
6PE
Research and direction by Ioannis (John) Konstas; compiled and finalized with AI assistance.